'exceptional strength durability'

Alloy Steel EN19 is a high-quality, high-tensile steel with good ductility, shock resistance, and wear resistance. With a good combination of ductility and shock resistance, it is suitable for high-loading applications such as engine gear boxes. In recent years, Grade 19 has become increasingly popular in the automobile industry due to its ability to be machined exceptionally precisely. Alloy Steel EN19 has proven itself as a material in the Oil & Gas industry. The material is well suited to any application where strength is a significant consideration. We are the primary Alloy Steel EN19 supplier to industry leaders. Contact us to purchase the best steel materials at the cheapest price. Stock Availability of Alloy Steel EN19: This Alloy Steel is normally available in forms like EN19 Rough Round and EN19 Plate. These EN19 plates can be cut and deliver to the customer’s requirement on order basis. Applications of Alloy Steel EN19: Alloy Steel EN19 was originally introduced for the use in machine tool and motor industries for gears, pinions, shafts, spindles and the like. Later its applications became much more extended and it is now widely used in areas such as the oil and gas industries.

The Ni-Cr-Mo alloy steel EN36 (Engineering Steel 36) is a hardening engineering steel. EN36 metal is designed specifically for carburising. This steel is commonly utilized due to its high core strength and exceptional toughness. Because of its high surface strength and soft and strong core, alloy steel EN36 is widely used in the vehicle sector. Alloy Steel EN36 is widely used in all industries to produce high-strength products. We provide alloy metal in round form at the most competitive price. Characteristics of EN36: Fatigue resistance High core strength Out stanning toughness High Surface strength Stock Availability of Alloy Steel EN36 Alloy Steel EN36 materials are normally available in Round form. Above 200mm EN36 rods are available only in forged form and can be supplied against order. We supply En36 steel rods as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN36: Alloy Steel EN36 is used extensively by all industry sectors for components and shafts requiring high surface wear resistance, high core strength and impact properties. Typical uses are: Heavy Duty Bushings, Collets, Conveyor Pins, Heavy Duty Gears, King Pins, Ring Gears, Sprockets, Shafts etc..

Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium. One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties. Stock Availability of Tool Steel - High Carbon Steel HCHCR D2: This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D2: Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Acrylic is a clear plastic substance with exceptional strength, stiffness, and optical clarity. The most crucial aspect of this plastic is its low cost. Acrylic plastic sheet is simple to make, bonds well with adhesives and solvents, and is straightforward to thermoform. It outperforms several other transparent polymers in terms of weathering. And it's usually used to make aquarium tanks, models, signage, and level tubes. We are a significant supplier of acrylic sheet and rod to a variety of sectors. We offer the highest grade plastic at the most competitive prices. Stock Availability of Acrylic: We supply the material in the form of round pipe, round rod, sheet, square bar, Plate. Applications of Acrylic: Acrylic material is widely used in aquarium tanks, model making, signage, art and crafts, Level Tubes etc.

Mild Steel Ms Polish is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Polish is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Polish: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Polish: Mild Steel Ms Polish are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Rough is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Rough is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Rough: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Rough: Mild Steel Ms Rough are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Phosphor Bronze is a remarkable material known for its unique blend of strength and ductility, making it an ideal choice for various applications. It exhibits exceptional spring qualities and offers high wear resistance, fatigue resistance, and hardness. The composition of phosphor bronze consists of copper alloyed with tin and phosphorus, resulting in a highly sought-after specialty metal that possesses numerous favorable characteristics. This versatile material finds extensive use in the manufacturing of springs, fasteners, and bolts. We are proud to be the primary supplier of top-quality steel materials for renowned industry leaders. Contact us to buy a best steel materials at best price. Stock Availability of Phosphor Bronze: Phosphor Bronze material is available in the forms of Finishing Bush, Round, Square, Round Pipe, Square Bush, Flat, Hexagon. We supply these materials as per customer’s cutting requirement. Applications of Phosphor Bronze: Phosphor bronze is used for springs, bolts, bushings and bearings, electrical switches with moving or sliding parts, dental bridges and various other products or assemblies where resistance to fatigue, wear, and corrosion are required

HDS H13 Tool Steel is a flexible chromium-molybdenum hot work steel that is frequently used in hot and cold work tooling applications. H13's hot hardness (hot strength) resists thermal fatigue cracking caused by cyclic heating and cooling cycles in hot work tooling applications.H13 is also employed in a number of cold work tooling applications due to its high toughness and excellent heat treatment resilience. H13 is utilized for more hot work tooling applications than any other tool steel due to its exceptional combination of high toughness and resistance to thermal fatigue cracking (also known as heat checking). In these applications, H13 outperforms typical alloy steels such as 4140 in terms of hardenability and wear resistance. Stock Availability of Tool Steel HDS H13: Tool Steel HDS H13 materials are normally available in the various forms of HDS Round, HDS Square and HDS Flat. HDS H13 Grades are supplied against specific orders. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel HDS H13: Tool Steel HDS H13 is widely used in aluminum and zinc casting dies, as well as in aluminum extrusion, aluminum die casting and press tooling. This grade is ideal for a range of hot work and cold work applications - particularly hot work applications where drastic cooling is required throughout its operation.