P20, a type of Pre Hardened Plastic mold steel, possesses a uniform hardness throughout large cross sections. It offers advantageous characteristics such as high weldability with minimal increase in hardness, effective mirror polishability, and reduced streak texture, which facilitate easier finishing. The hardness of P20, a pre-hardened plastic mold steel, ranges from 240-280 BHN. This steel exhibits uniform hardness throughout large cross sections and offers advantages such as good weldability, minimal increase in hardness during welding, the ability to achieve a smooth mirror-like polish, and reduced streak texture for easier finishing. The supplied hardness of this steel is within the range of 240-280 BHN. Stock Availability of Plastic Mould Steel: P20 grade steel materials are normally available in the forms of Round and Flat. We supply these materials as per our Customer’s cutting requirement. Applications of Plastic Mould Steel: Plastic mould steel equivalent to DIN 2311 used for die holders, zinc die, casting dies, backers, bolsters, injection moulds, mould frames of plastic moulds, Shoe Blocks, pressure casting moulds, recipient sleeves etc.

Alloy Steel EN41B is a nitriding steel made of chromium, aluminum, and molybdenum. This case-hardening steel has strong wear resistance, as well as toughness and ductility. This alloy steel can achieve case hardnesses of up to 68 Hrc. It is also known as nitrating steel. It is toughened to a specific depth depending on the application in nitrating treatment to improve wear resistance and impact load on material. Stock Availability of Alloy Steel EN41B: Alloy Steel EN41B materials are available only in Round form. EN41B Rods are available in annealed condition and it can be machined. We supply this EN41B Steel Rods as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN41B: Alloy Steel EN41B is a very popular grade of low carbon-manganese free-cutting steel, which is most suitable for the manufacture of repetition turned components such as nuts, bolts, hydraulic fittings and studs. This Alloy Steel is used particularly where intricate drilling and machining operations are involved.

Carbon Steel EN1A Leaded is widely recognized as a highly sought-after grade of low carbon-manganese free cutting steel. This particular grade excels in the production of repetition turned components, including hydraulic fittings, nuts, bolts, and studs. Its exceptional performance comes to the fore when intricate drilling and machining operations are required. For those seeking even greater machinability, En1a Lead (En1aPb) is readily available. Additionally, this grade has the capability of being case-hardened, resulting in components with superior wear resistance. To prevent machine blockage, the formation of swarf occurs in small chips during the machining process. Stock Availability of Carbon Steel EN1A Leaded: Carbon Steel En1a materials are normally available in forms like Leaded and Non-leaded. We supply these materials as per our Customer’s cutting Requirement. Applications of Carbon Steel EN1A Leaded: En1a steels are suitable for applications where good machinability is the prime consideration. e.g. light duty studs, cycle components, and many intricate parts for textile and printing machinery.

Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium. One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties. Stock Availability of Tool Steel - High Carbon Steel HCHCR D2: This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D2: Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Grade 410 Stainless Steel is known for its exceptional resistance to hot gases, steam, mild acids and alkalies, as well as freshwater and dry air. By hardening the steel, it achieves maximum heat and corrosion resistance. Our Stainless Steel Grade 410 is a martensitic grade that contains 11.5% chromium, providing excellent wear and corrosion resistance. It can withstand certain chemicals, mild acids, food, water, and air. As a leading supplier of Non-ferrous steels, we offer competitive prices for all your Non Ferrous steel needs. Please reach out to us to make your purchase today. Stock Availability of Stainless Steel SS410: Stainless Steel SS410 material is available in the form Round and Plate. We supply these materials as per customer’s cutting requirement. Applications of Stainless Steel SS410: Mostly using in Bolts, screws, bushings and nuts, Petroleum fractionating structures ,Shafts, pumps and valves, Mine ladder rungs, Gas turbines.

Grade 420 stainless steel is a high-carbon steel known for its excellent corrosion resistance properties. With a minimum chromium content of 12%, it offers great ductility in its annealed state and can be further hardened through heat treatment. This grade boasts the highest hardness - 50HRC - among all stainless steel grades. Similar to grade 420, there are other martensitic steels that contain vanadium, sulphur, and molybdenum in their composition. The grade 440 series also falls under this category. Additionally, there is a non-standard grade called 420C with slightly higher carbon content compared to grade 420. As one of the leading dealers in non-ferrous steels, we provide top-quality products at competitive prices. Get in touch with us today to purchase the best Non Ferrous steels available on the market. Stock Availability of Stainless Steel SS420: Stainless Steel SS420 material is available in the form Round . We supply these materials as per customer’s cutting requirement. Applications of Stainless Steel SS420: The key applications of grade 420 stainless steels include, Shear blades, Needle valves, Surgical equipment, Cutlery.

Copper is soft, malleable and ductile metal with with very high thermal and electrical conductivity. A fresh exposed surface of pure copper has a reddish orange color. This is a type of Non-ferrous material, which very common and widely used material in industries. Copper is one of the few metals that can occur in nature in a directly usable metallic form. This led to very early human use in several regions, from c. 8000 BC. Thousands of years later. The first metal to be cast into a shape in a mold. We are main copper dealers for leading industry pioneers. Contact us to buy a best steel materials at best price. Stock Availability of Copper: EC Copper material is available in the forms of Round, Square Rod, Flat, Plate. We supply these materials as per customer’s cutting requirement. Applications of Copper: EC Copper is used as a conductor of heat and electricity, and constantly used in strain gauges and thermo-couple for temperature measurement.

Aluminium is an incredibly popular and widely utilized nonferrous material in various industries. With the chemical symbol Al and atomic number 13, it boasts a silvery-white appearance and possesses soft, non-magnetic, and ductile properties within the boron group. In fact, aluminium comprises approximately 8% of the Earth's crust by mass, making it the third most abundant element overall and the most abundant metal. Its versatility allows for widespread use in machinery parts and serves numerous industrial purposes. Additionally, aluminium plays a crucial role in the food and beverage industries As trusted aluminium dealers for renowned industry leaders, we are committed to providing top-quality materials at competitive prices. Please do not hesitate to contact us for all your steel material needs. Stock Availability of Aluminium: Aluminium material are available in the forms of Round Bar, Square Bar, Flat, Round Pipe, Hexagon, Square Pipe, Sheet, Coil. We supply these materials as per customer’s cutting requirement. Applications of Aluminium: Aluminium is used in a huge variety of products including cans, foils, kitchen utensils, window frames, beer kegs and aeroplane parts. It is often used as an alloy because aluminium itself is not particularly strong.