HDS H11 Tool Steel is an all-purpose hot work tool steel with high stiffness and endurance. Good thermal conductivity, resistance to heat cracking, and water cooling to a limited extent. Ejector pins, equipment holders, and shrink-fit chucks are examples of applications. Hot work tool steel containing 5% chromium has excellent strength and toughness, is the best thermal physical phenomenon, and is prone to hot cracking. This ensures lengthy tool life in die-casting, press forging, extrusion, and other processes. Stock Availability of Tool Steel HDS H11: Tool Steel HDS H11 materials are normally available in the various forms of HDS Round, HDS Square and HDS Flat. Commercially available HDS materials are H11 Grade only. HDS H13 Grades are supplied against specific orders. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel HDS H11: Besides applications typical for the area of hot-work steels, this grade is especially used for ejector pins, tool holders, bridge kind tools, liner holders, forging dies, hot work punches, and shrink work chucks.

HDS H13 Tool Steel is a flexible chromium-molybdenum hot work steel that is frequently used in hot and cold work tooling applications. H13's hot hardness (hot strength) resists thermal fatigue cracking caused by cyclic heating and cooling cycles in hot work tooling applications.H13 is also employed in a number of cold work tooling applications due to its high toughness and excellent heat treatment resilience. H13 is utilized for more hot work tooling applications than any other tool steel due to its exceptional combination of high toughness and resistance to thermal fatigue cracking (also known as heat checking). In these applications, H13 outperforms typical alloy steels such as 4140 in terms of hardenability and wear resistance. Stock Availability of Tool Steel HDS H13: Tool Steel HDS H13 materials are normally available in the various forms of HDS Round, HDS Square and HDS Flat. HDS H13 Grades are supplied against specific orders. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel HDS H13: Tool Steel HDS H13 is widely used in aluminum and zinc casting dies, as well as in aluminum extrusion, aluminum die casting and press tooling. This grade is ideal for a range of hot work and cold work applications - particularly hot work applications where drastic cooling is required throughout its operation.

EN24 Alloy Steel is a high-strength steel alloy. This Alloy Steel EN24 grade contains nickel, chromium, and molybdenum and has a high tensile strength, good ductility, and wear resistance. With reasonably good impact qualities at low temperatures, this material is also suited for a wide range of high-temperature applications. The grade is a nickel-chromium-molybdenum alloy, which provides high tensile steel strength as well as good ductility and wear resistance. It is useful for a wide range of elevated temperature applications due to its comparatively good impact qualities at low temperatures. We are the primary Alloy Steel EN24 dealers for industry leaders. Contact us if you want to acquire the best steel materials at the greatest price. Stock Availability of Alloy Steel EN24: This Alloy Steel Material is available in EN24 Rounds. More than 150mm dia rods can be availed in forged forms also. En24 round rods are supplied as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN24: Alloy Steel EN24 most commonly used as High Strength Shafts used in Aircrafts, heavy vehicle crank shafts, Connecting rods, Gear shafts, Chain parts, Clutches, Propeller shafts, Cam shafts, Spindles, Screws, Studs, Pinions, Taps, Boring bars etc. It is also seen as Punch, Die, Drill bush, Retaining rings and Gears. Preferred to be applied for heat treated components having large sections.

Carbon Steel En8, a type of carbon and medium tensile steel, is widely accessible and offers increased strength compared to mild steel. It can be easily machined in any state and is commonly utilized in its untreated form. En8, a type of carbon steel, has the ability to undergo additional surface hardening through induction processes. When heat treated, En8 materials exhibit a consistent machinability due to their well-balanced metallurgical structures. Stock Availability of Carbon Steel En8: Carbon Steel EN8 materials are normally available in various forms such as EN8 Rough Rod, EN8 Polish Round, EN8 Rough Square, EN8 Rough Flat, EN8 Plate, EN8 Circle, EN8 Sheet. We supply these materials as per our Customer’s cutting Requirement. Applications of Carbon Steel En8: Carbon Steel En8 is a commonly available carbon and medium tensile steel with improved strength over mild steel. EN8 carbon steel can be machined in any condition and it is generally used in untreated condition. EN8 can also be further surface-hardened by induction processes. EN8 materials in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.

Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium. One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties. Stock Availability of Tool Steel - High Carbon Steel HCHCR D2: This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D2: Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.

Grade 410 Stainless Steel is known for its exceptional resistance to hot gases, steam, mild acids and alkalies, as well as freshwater and dry air. By hardening the steel, it achieves maximum heat and corrosion resistance. Our Stainless Steel Grade 410 is a martensitic grade that contains 11.5% chromium, providing excellent wear and corrosion resistance. It can withstand certain chemicals, mild acids, food, water, and air. As a leading supplier of Non-ferrous steels, we offer competitive prices for all your Non Ferrous steel needs. Please reach out to us to make your purchase today. Stock Availability of Stainless Steel SS410: Stainless Steel SS410 material is available in the form Round and Plate. We supply these materials as per customer’s cutting requirement. Applications of Stainless Steel SS410: Mostly using in Bolts, screws, bushings and nuts, Petroleum fractionating structures ,Shafts, pumps and valves, Mine ladder rungs, Gas turbines.

Grade 420 stainless steel is a high-carbon steel known for its excellent corrosion resistance properties. With a minimum chromium content of 12%, it offers great ductility in its annealed state and can be further hardened through heat treatment. This grade boasts the highest hardness - 50HRC - among all stainless steel grades. Similar to grade 420, there are other martensitic steels that contain vanadium, sulphur, and molybdenum in their composition. The grade 440 series also falls under this category. Additionally, there is a non-standard grade called 420C with slightly higher carbon content compared to grade 420. As one of the leading dealers in non-ferrous steels, we provide top-quality products at competitive prices. Get in touch with us today to purchase the best Non Ferrous steels available on the market. Stock Availability of Stainless Steel SS420: Stainless Steel SS420 material is available in the form Round . We supply these materials as per customer’s cutting requirement. Applications of Stainless Steel SS420: The key applications of grade 420 stainless steels include, Shear blades, Needle valves, Surgical equipment, Cutlery.

Copper is soft, malleable and ductile metal with with very high thermal and electrical conductivity. A fresh exposed surface of pure copper has a reddish orange color. This is a type of Non-ferrous material, which very common and widely used material in industries. Copper is one of the few metals that can occur in nature in a directly usable metallic form. This led to very early human use in several regions, from c. 8000 BC. Thousands of years later. The first metal to be cast into a shape in a mold. We are main copper dealers for leading industry pioneers. Contact us to buy a best steel materials at best price. Stock Availability of Copper: EC Copper material is available in the forms of Round, Square Rod, Flat, Plate. We supply these materials as per customer’s cutting requirement. Applications of Copper: EC Copper is used as a conductor of heat and electricity, and constantly used in strain gauges and thermo-couple for temperature measurement.

Nylon HDP is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called 'alkathene' or 'polythene' .HDP is known for its high strength-to-density ratio. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumbers.HDP is resistant to different solvents, so it cannot be glued. Pipe joints must be made by welding. It is also harder and more opaque and can withstand somewhat higher temperatures.The thermophysical properties include ; Melting point:130.8 °C, Density:940 kg/m,Temperature of crystallization:111.9 °C,Latent heat of fusion:178.6 kJ/kg,Specific heat capacity:1330 to 2400 J/kg-K. Stock Availability of Nylon Hdp: Nylon HDP is available in forms of Nylon Hdp Round. We supply these materials as per customer’s cutting requirement. Applications of Nylon Hdp: Nylon HDP is used for House wrap,flexible Hdp pipes,bottle crates,stools for outdoor use,the monobloc chair,toys and playground equipments,ballistic plates,banners,bottle caps,boats,swimming pool installation,trackout control mats,electrical and plumbing boxes,backpacking frames.