Cast iron is a group of iron-carbon alloys with a carbon content of more than 2 to 4 %. Cast iron is made by reducing Iron Ore in a Blast Furnace. In addition, varying amounts of silicon from 1 to 3% by weight and manganese as well as traces of impurities such as sulfur and phosphorus. Mechanical properties include ,hadrness ,toughness ,ductility ,elasticity,malleability,tensile strength,fatigue strength,melting point,castability,machinability. Stock Availability of Cast Iron: Cast iron material is available in the forms of Cast iron Round,Cast iron Square,Cast iron Bush. We supply these materials as per customer’s cutting requirement. Applications of Cast Iron: It is used in making pipes,to carry suitable fluids,making different machines,making automotive parts,making pots pans and utensils,making anchor of ships.

Gunmetal, also known as red brass, is a type of bronze that consists of copper, tin, and zinc. The proportions may vary, but an approximation is 88% copper, 8-10% tin, and 2-4% zinc. Originally used primarily for making guns, gunmetal has largely been replaced by steel. At Gunmetal Cast, we offer high-quality gunmetal products with excellent machinability and wear resistance. Our products are specifically designed to have high resistance to seizure and good corrosion resistance under normal lubrication conditions. They are commonly used in steam and hydraulic castings, valves, gears, statues, and various small objects like buttons. As the main supplier of gunmetal for leading industry pioneers, we provide the best steel materials at competitive prices. Contact us today to purchase top-notch gunmetal products. Stock Availability of Gun Metal: Gunmetal material is available in the forms of Gunmetal Finishing Bush, Gunmetal Round, Gunmetal Square, Gunmetal Round Bush, Gunmetal Square Bush, Gunmetal Flat, Gunmetal Hexagon. We supply these materials as per customer’s cutting requirement. Applications of Gun Metal: Gunmetal is used for gears and bearings, Pressure tight requirements, valve and pump bodies, Pump impeller, fittings for gasoline and oil lines, Bushing, General engineering application.

Cast Nylon is a very adaptable thermoplastic resin. Cast nylon is an engineering material that is highly resistant to impact, wear, and vibration. It can considerably contribute to weight and noise reduction, lubricant savings, and gear life extension. Its physical qualities and low cost make it a better choice in many mechanical applications than metal and rubber. Cast Nylon offers excellent mechanical, thermal, and chemical resistance. It also has a high dimensional stability and is relatively free of internal tension. Stock Availability of Cast Nylon: Cast Nylon are of Nylon 66, MC 901 Grade, Metallon grade. These grades are available in Blue and Yellow colors and forms of Cast Nylon Round, Cast Nylon Sheet and Cast Nylon Plate. We supply these materials as per our customer’s cutting requirement. Applications of Cast Nylon: Cast Nylons are widely used in Bearings, Bushes, Clamps, Rollers, Door latches, Heavy duty wheels and Gears.

We are the major plastic supplier all over Madurai. We have a wide range of plastic products at the best price. This Black nylon is manufactured with the high quality of material & contemporary techniques in fulfillment with the norms of the market. The provided nylon round is inspected on various parameters so as to deliver a defect free range. Offered Clients can avail this nylon round from us in various customized options as per their requisites. Stock Availability of Black Nylon: Black Nylon materials are normally available in the forms of Round and Square , Tube and Flat. We supply these materials as per our Customer’s cutting requirement. Applications of Black Nylon: Application of Black Nylon includes wear components such as gears, cams, Bearings, Valve seats, Electrical and plumbing boxes.

Phosphor Bronze is a remarkable material known for its unique blend of strength and ductility, making it an ideal choice for various applications. It exhibits exceptional spring qualities and offers high wear resistance, fatigue resistance, and hardness. The composition of phosphor bronze consists of copper alloyed with tin and phosphorus, resulting in a highly sought-after specialty metal that possesses numerous favorable characteristics. This versatile material finds extensive use in the manufacturing of springs, fasteners, and bolts. We are proud to be the primary supplier of top-quality steel materials for renowned industry leaders. Contact us to buy a best steel materials at best price. Stock Availability of Phosphor Bronze: Phosphor Bronze material is available in the forms of Finishing Bush, Round, Square, Round Pipe, Square Bush, Flat, Hexagon. We supply these materials as per customer’s cutting requirement. Applications of Phosphor Bronze: Phosphor bronze is used for springs, bolts, bushings and bearings, electrical switches with moving or sliding parts, dental bridges and various other products or assemblies where resistance to fatigue, wear, and corrosion are required

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

We are a renowned supplier of Brass metal in various forms such as Round, Hexagon, and Flat. Brass is a versatile alloy made from copper and zinc, with the ability to adjust the proportions for different mechanical and electrical properties. Compared to Bronze or Zinc, Brass offers higher malleability. Its relatively low melting point and flow characteristics make it an accessible material for casting. By adjusting the copper-zinc ratios, we can create both hard and soft brasses. Brass has a density ranging from 8.4 to 8.73 grams per cubic centimeter, making it a durable and sturdy option for various applications. For a quote or more information about our products, please get in touch with us. Stock Availability of Brass: Brass materials are available in the forms of Round,Hexagon, Flat, Round Pipe, Square Pipe, Square Rod, Sheet, Square Pipe, Plate. We supply these materials as per customer’s cutting requirement. Applications of Brass: It is still commonly used in applications where low friction and corrosion resistance is required, such as locks, hinges, gears, bearings, ammunition casings, zippers, plumbing, hose couplings, valves, and electrical plugs and sockets.

We are the largest plastic supplier in Madurai. We have a large selection of plastic products at the most competitive prices. One of the most common engineering thermoplastics is nylon. Nylon fibers are strong, with high tensile strength, electricity, and luster. It provides a superb balance of mechanical performance and affordability. Nylon is a smooth thermoplastic substance that can be melted into fibers, films, or forms. Stock Availability of Nylon: Nylon materials are of Nylon 6 Grade and it is available in Nylon Round and Nylon Square. We supply these materials as per customer’s cutting requirement. Applications of Nylon: Applications of Nylon includes wear components such as gears, cams, Bearings, Valve seats, Electrical and plumbing boxes, corrosion protection for steel pipeline.

We are the major plastic supplier all over the Madurai. We have a wide range of plastic products at best price. MC Nylon is made by the polymerization and molding of the nylon monomer primary material under atmospheric pressure. MC NYLON is a high molecular thermoplastic. MC Nylon /PA - 6G is widely applied in bearing machine part because it shows very good mechanical strength & wear resistance. This material has improved nylon characteristics that are not found in injection molding and extrusion-molded products. Stock Availability of MC Nylon: MC Nylon materials are normally available in the forms of Round and Square , Tube and Flat. We supply these materials as per our Customer’s cutting requirement. Applications of MC Nylon: Application of MC Nylon includes wear components such as gears, cams, Bearings, Valve seats, Electrical and plumbing boxes.