The Ni-Cr-Mo alloy steel EN36 (Engineering Steel 36) is a hardening engineering steel. EN36 metal is designed specifically for carburising. This steel is commonly utilized due to its high core strength and exceptional toughness. Because of its high surface strength and soft and strong core, alloy steel EN36 is widely used in the vehicle sector. Alloy Steel EN36 is widely used in all industries to produce high-strength products. We provide alloy metal in round form at the most competitive price. Characteristics of EN36: Fatigue resistance High core strength Out stanning toughness High Surface strength Stock Availability of Alloy Steel EN36 Alloy Steel EN36 materials are normally available in Round form. Above 200mm EN36 rods are available only in forged form and can be supplied against order. We supply En36 steel rods as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN36: Alloy Steel EN36 is used extensively by all industry sectors for components and shafts requiring high surface wear resistance, high core strength and impact properties. Typical uses are: Heavy Duty Bushings, Collets, Conveyor Pins, Heavy Duty Gears, King Pins, Ring Gears, Sprockets, Shafts etc..

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Polish is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Polish is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Polish: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Polish: Mild Steel Ms Polish are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Rough is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Rough is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Rough: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Rough: Mild Steel Ms Rough are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Phosphor Bronze is a remarkable material known for its unique blend of strength and ductility, making it an ideal choice for various applications. It exhibits exceptional spring qualities and offers high wear resistance, fatigue resistance, and hardness. The composition of phosphor bronze consists of copper alloyed with tin and phosphorus, resulting in a highly sought-after specialty metal that possesses numerous favorable characteristics. This versatile material finds extensive use in the manufacturing of springs, fasteners, and bolts. We are proud to be the primary supplier of top-quality steel materials for renowned industry leaders. Contact us to buy a best steel materials at best price. Stock Availability of Phosphor Bronze: Phosphor Bronze material is available in the forms of Finishing Bush, Round, Square, Round Pipe, Square Bush, Flat, Hexagon. We supply these materials as per customer’s cutting requirement. Applications of Phosphor Bronze: Phosphor bronze is used for springs, bolts, bushings and bearings, electrical switches with moving or sliding parts, dental bridges and various other products or assemblies where resistance to fatigue, wear, and corrosion are required

Cast iron is a group of iron-carbon alloys with a carbon content of more than 2 to 4 %. Cast iron is made by reducing Iron Ore in a Blast Furnace. In addition, varying amounts of silicon from 1 to 3% by weight and manganese as well as traces of impurities such as sulfur and phosphorus. Mechanical properties include ,hadrness ,toughness ,ductility ,elasticity,malleability,tensile strength,fatigue strength,melting point,castability,machinability. Stock Availability of Cast Iron: Cast iron material is available in the forms of Cast iron Round,Cast iron Square,Cast iron Bush. We supply these materials as per customer’s cutting requirement. Applications of Cast Iron: It is used in making pipes,to carry suitable fluids,making different machines,making automotive parts,making pots pans and utensils,making anchor of ships.

HDS H13 Tool Steel is a flexible chromium-molybdenum hot work steel that is frequently used in hot and cold work tooling applications. H13's hot hardness (hot strength) resists thermal fatigue cracking caused by cyclic heating and cooling cycles in hot work tooling applications.H13 is also employed in a number of cold work tooling applications due to its high toughness and excellent heat treatment resilience. H13 is utilized for more hot work tooling applications than any other tool steel due to its exceptional combination of high toughness and resistance to thermal fatigue cracking (also known as heat checking). In these applications, H13 outperforms typical alloy steels such as 4140 in terms of hardenability and wear resistance. Stock Availability of Tool Steel HDS H13: Tool Steel HDS H13 materials are normally available in the various forms of HDS Round, HDS Square and HDS Flat. HDS H13 Grades are supplied against specific orders. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel HDS H13: Tool Steel HDS H13 is widely used in aluminum and zinc casting dies, as well as in aluminum extrusion, aluminum die casting and press tooling. This grade is ideal for a range of hot work and cold work applications - particularly hot work applications where drastic cooling is required throughout its operation.

EN24 Alloy Steel is a high-strength steel alloy. This Alloy Steel EN24 grade contains nickel, chromium, and molybdenum and has a high tensile strength, good ductility, and wear resistance. With reasonably good impact qualities at low temperatures, this material is also suited for a wide range of high-temperature applications. The grade is a nickel-chromium-molybdenum alloy, which provides high tensile steel strength as well as good ductility and wear resistance. It is useful for a wide range of elevated temperature applications due to its comparatively good impact qualities at low temperatures. We are the primary Alloy Steel EN24 dealers for industry leaders. Contact us if you want to acquire the best steel materials at the greatest price. Stock Availability of Alloy Steel EN24: This Alloy Steel Material is available in EN24 Rounds. More than 150mm dia rods can be availed in forged forms also. En24 round rods are supplied as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN24: Alloy Steel EN24 most commonly used as High Strength Shafts used in Aircrafts, heavy vehicle crank shafts, Connecting rods, Gear shafts, Chain parts, Clutches, Propeller shafts, Cam shafts, Spindles, Screws, Studs, Pinions, Taps, Boring bars etc. It is also seen as Punch, Die, Drill bush, Retaining rings and Gears. Preferred to be applied for heat treated components having large sections.

Alloy Steel EN31 is an extremely strong steel alloy that is hardened and tempered before being supplied. Its nickel, chromium, and molybdenum content results in a high tensile steel with good ductility and wear resistance. EN31 round bars have a high internal strength and a high exterior strength, making them extremely wear-resistant. Alloy Steel EN31 is ideal for a wide range of elevated temperature applications due to its comparatively good impact qualities at low temperatures. Alloy Steel EN31 round bars provide an excellent balance of ductility, strength, and wear resistance. EN31 Alloy Steel is a high-strength alloy engineering steel. Stock Availability of Alloy Steel EN31: This Alloy Steel Material is available in EN31 Rounds,EN31 Flats,En31 Square. These materials are supplied as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN31: Applications for EN31 steel include taps, gauges, swaging dies, ejector pins, ball, and roller bearings. It is good quality steel for wear-resisting machine parts and for press tools that do not merit a more complex quality.