Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium. One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties. Stock Availability of Tool Steel - High Carbon Steel HCHCR D2: This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D2: Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.

Carbon Steel EN1A Non Leaded is known for its exceptional machinability and is a top-grade free-cutting steel. It is suitable for applications requiring case hardening and electroplating. Whether you prefer the black or bright cold drawn bar form, we are fully equipped to provide you with high-quality free cutting steel. Trust in our expertise and experience to meet your carbon steel needs effectively. Stock Availability of Carbon Steel EN1A Non Leaded: Carbon Steel En1a materials are normally available in forms like Leaded and Non-leaded. We supply these materials as per our Customer’s cutting Requirement. Applications of Carbon Steel EN1A Non Leaded: En1a steels are suitable for applications where good machinability is the prime consideration. e.g. light duty studs, cycle components, and many intricate parts for textile and printing machinery.

EN9 steel, classified as a medium carbon steel grade, contains approximately 0.45% carbon. Renowned for its exceptional wear resistance properties, EN9 steel rods can undergo flame or induction hardening to achieve a remarkable surface hardness, further enhancing their wear resistance capabilities. The provided text specifies the criteria for carbon and carbon-manganese, alloy, free-cutting, and stainless steels that are typically supplied in a brightly finished condition after being cold-processed. Carbon Steel EN9 is widely utilized in various engineering fields for a multitude of applications. It is commonly employed in the manufacturing of shafts, axes, knives, bushes, crankshafts, screws, woodworking drills, hammers, and sickles. Stock Availability of Carbon Steel EN9: Carbon Steel EN9 materials are normally available in forms like EN9 Rough Round. We supply En9 materials as per our Customer’s Cutting Requirement. Applications of Carbon Steel EN9: Carbon Steel EN9 is used commonly for many general engineering applications. Typical applications include, shafts, axes, knives, bushes, crankshafts, screws, sickles, wood working drills and hammers.

D3 steel Tool steel with 12% ledeburitic chromium and excellent wear resistance. Essentially used as cutting tools for sheets up to 4 mm thick, trimming dies, blanking dies for paper and plastics, shear cutting edges, and rotational shear edges for sheet thicknesses up to 2 mm. D3 steel is a high carbon 2% and high chromium 12% tool steel with excellent wear resistance. Its supply condition is generally annealed for easy machining, with a suggested hardness of 57-58 HRC once dies and tools are made. Stock Availability of Tool Steel - High Carbon Steel HCHCR D3: This Tool Steel materials are normally available in the various forms of HCHCR D3 Round, HCHCR D3 Square and HCHCR D3 Flat. Bigger size flats are normally available in the forged form. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D3: Tool Steel - High Carbon Steel HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Polish is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Polish is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Polish: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Polish: Mild Steel Ms Polish are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Rough is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Rough is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Rough: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Rough: Mild Steel Ms Rough are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

HDS H13 Tool Steel is a flexible chromium-molybdenum hot work steel that is frequently used in hot and cold work tooling applications. H13's hot hardness (hot strength) resists thermal fatigue cracking caused by cyclic heating and cooling cycles in hot work tooling applications.H13 is also employed in a number of cold work tooling applications due to its high toughness and excellent heat treatment resilience. H13 is utilized for more hot work tooling applications than any other tool steel due to its exceptional combination of high toughness and resistance to thermal fatigue cracking (also known as heat checking). In these applications, H13 outperforms typical alloy steels such as 4140 in terms of hardenability and wear resistance. Stock Availability of Tool Steel HDS H13: Tool Steel HDS H13 materials are normally available in the various forms of HDS Round, HDS Square and HDS Flat. HDS H13 Grades are supplied against specific orders. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel HDS H13: Tool Steel HDS H13 is widely used in aluminum and zinc casting dies, as well as in aluminum extrusion, aluminum die casting and press tooling. This grade is ideal for a range of hot work and cold work applications - particularly hot work applications where drastic cooling is required throughout its operation.