Nylon HDP is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called 'alkathene' or 'polythene' .HDP is known for its high strength-to-density ratio. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumbers.HDP is resistant to different solvents, so it cannot be glued. Pipe joints must be made by welding. It is also harder and more opaque and can withstand somewhat higher temperatures.The thermophysical properties include ; Melting point:130.8 °C, Density:940 kg/m,Temperature of crystallization:111.9 °C,Latent heat of fusion:178.6 kJ/kg,Specific heat capacity:1330 to 2400 J/kg-K. Stock Availability of Nylon Hdp: Nylon HDP is available in forms of Nylon Hdp Round. We supply these materials as per customer’s cutting requirement. Applications of Nylon Hdp: Nylon HDP is used for House wrap,flexible Hdp pipes,bottle crates,stools for outdoor use,the monobloc chair,toys and playground equipments,ballistic plates,banners,bottle caps,boats,swimming pool installation,trackout control mats,electrical and plumbing boxes,backpacking frames.

Teflon is used in nonstick cookware, waterproof clothes and furniture, self-cleaning ovens, microwave popcorn bags, pizza boxes, and other products. Teflon has a very low coefficient of friction, as well as excellent heat resistance and dielectric characteristics. Stock Availability of Teflon: These materials are available in Teflon Round, Teflon sheet, Teflon Bush, Teflon Strip, Teflon Plate. We supply these materials as per our customer’s cutting requirement. Applications of Teflon: Teflons are used in manufacturing of cookware, manufacturing of gears, bearings, pipe lining, joints, Slide plates, bushings, O-rings.

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

SS316 steel is widely recognized as the top choice for corrosion resistance. Its composition, which includes molybdenum, greatly enhances its ability to withstand pitting and crevice corrosion in environments contaminated with chloride, such as seawater and acetic acid vapors. In addition to its exceptional corrosion resistance, SS316 also boasts superior performance at high temperatures. It exhibits higher creep resistance, stress-to-rupture strength, and tensile strength compared to other materials. Due to its remarkable properties, 316 stainless steel is commonly utilized in various industries. It is extensively used in the manufacturing of pharmaceutical and photographic equipment, valve and pump components, tanks, pulp and paper machinery, as well as textile processing equipment. As a major supplier of stainless steel, we take pride in serving numerous industry leaders with our top-quality products. Stock Availability of Stainless Steel SS316: Grade 316 material is available in forms Round, Square Bar, Sheet, Flat, Plate, Coil, Hexagon, Round Pipe,Square Pipe. We supply these materials as per customer’s cutting requirement. Applications of Stainless Steel SS316: Grade 316 material is available in forms Round, Square Bar, Sheet, Flat, Plate, Coil, Hexagon, Round Pipe,Square Pipe. We supply these materials as per customer’s cutting requirement.

Grade 316L is a low carbon version of 316 stainless steel and offers immunity from sensitization, which is the precipitation of carbides along grain boundaries. The price difference between 316 and 316L stainless steel is minimal. Because of its properties, Grade 316L is commonly used in heavy gauge welded components measuring over approximately 6mm. Its austenitic structure also provides exceptional toughness, even at extremely low temperatures. Compared to other chromium-nickel austenitic stainless steels, 316L stainless steel exhibits higher creep resistance, stress to rupture strength, and tensile strength at elevated temperatures. We are proud to be a leading supplier of stainless steel for numerous industry leaders. Stock Availability of Stainless Steel SS316L: Grade 316L material is available in forms Round, Square Bar, Sheet, Flat, Plate, Coil, Hexagon, Round Pipe,Square Pipe. We supply these materials as per customer’s cutting requirement. Applications of Stainless Steel SS316L Typical applications include,Food preparation equipment particularly in chloride environments,Pharmaceuticals,Marine applications,Architectural applications,Medical implants, including pins, screws and orthopedic implants like total hip and knee replacements,Fasteners.

We are a renowned supplier of Brass metal in various forms such as Round, Hexagon, and Flat. Brass is a versatile alloy made from copper and zinc, with the ability to adjust the proportions for different mechanical and electrical properties. Compared to Bronze or Zinc, Brass offers higher malleability. Its relatively low melting point and flow characteristics make it an accessible material for casting. By adjusting the copper-zinc ratios, we can create both hard and soft brasses. Brass has a density ranging from 8.4 to 8.73 grams per cubic centimeter, making it a durable and sturdy option for various applications. For a quote or more information about our products, please get in touch with us. Stock Availability of Brass: Brass materials are available in the forms of Round,Hexagon, Flat, Round Pipe, Square Pipe, Square Rod, Sheet, Square Pipe, Plate. We supply these materials as per customer’s cutting requirement. Applications of Brass: It is still commonly used in applications where low friction and corrosion resistance is required, such as locks, hinges, gears, bearings, ammunition casings, zippers, plumbing, hose couplings, valves, and electrical plugs and sockets.

Aluminium is an incredibly popular and widely utilized nonferrous material in various industries. With the chemical symbol Al and atomic number 13, it boasts a silvery-white appearance and possesses soft, non-magnetic, and ductile properties within the boron group. In fact, aluminium comprises approximately 8% of the Earth's crust by mass, making it the third most abundant element overall and the most abundant metal. Its versatility allows for widespread use in machinery parts and serves numerous industrial purposes. Additionally, aluminium plays a crucial role in the food and beverage industries As trusted aluminium dealers for renowned industry leaders, we are committed to providing top-quality materials at competitive prices. Please do not hesitate to contact us for all your steel material needs. Stock Availability of Aluminium: Aluminium material are available in the forms of Round Bar, Square Bar, Flat, Round Pipe, Hexagon, Square Pipe, Sheet, Coil. We supply these materials as per customer’s cutting requirement. Applications of Aluminium: Aluminium is used in a huge variety of products including cans, foils, kitchen utensils, window frames, beer kegs and aeroplane parts. It is often used as an alloy because aluminium itself is not particularly strong.

We are the largest plastic supplier in Madurai. We have a large selection of plastic products at the most competitive prices. One of the most common engineering thermoplastics is nylon. Nylon fibers are strong, with high tensile strength, electricity, and luster. It provides a superb balance of mechanical performance and affordability. Nylon is a smooth thermoplastic substance that can be melted into fibers, films, or forms. Stock Availability of Nylon: Nylon materials are of Nylon 6 Grade and it is available in Nylon Round and Nylon Square. We supply these materials as per customer’s cutting requirement. Applications of Nylon: Applications of Nylon includes wear components such as gears, cams, Bearings, Valve seats, Electrical and plumbing boxes, corrosion protection for steel pipeline.

Acrylic is a clear plastic substance with exceptional strength, stiffness, and optical clarity. The most crucial aspect of this plastic is its low cost. Acrylic plastic sheet is simple to make, bonds well with adhesives and solvents, and is straightforward to thermoform. It outperforms several other transparent polymers in terms of weathering. And it's usually used to make aquarium tanks, models, signage, and level tubes. We are a significant supplier of acrylic sheet and rod to a variety of sectors. We offer the highest grade plastic at the most competitive prices. Stock Availability of Acrylic: We supply the material in the form of round pipe, round rod, sheet, square bar, Plate. Applications of Acrylic: Acrylic material is widely used in aquarium tanks, model making, signage, art and crafts, Level Tubes etc.