Alloy Steel EN31 is an extremely strong steel alloy that is hardened and tempered before being supplied. Its nickel, chromium, and molybdenum content results in a high tensile steel with good ductility and wear resistance. EN31 round bars have a high internal strength and a high exterior strength, making them extremely wear-resistant. Alloy Steel EN31 is ideal for a wide range of elevated temperature applications due to its comparatively good impact qualities at low temperatures. Alloy Steel EN31 round bars provide an excellent balance of ductility, strength, and wear resistance. EN31 Alloy Steel is a high-strength alloy engineering steel. Stock Availability of Alloy Steel EN31: This Alloy Steel Material is available in EN31 Rounds,EN31 Flats,En31 Square. These materials are supplied as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN31: Applications for EN31 steel include taps, gauges, swaging dies, ejector pins, ball, and roller bearings. It is good quality steel for wear-resisting machine parts and for press tools that do not merit a more complex quality.

Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium. One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties. Stock Availability of Tool Steel - High Carbon Steel HCHCR D2: This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D2: Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.

D3 steel Tool steel with 12% ledeburitic chromium and excellent wear resistance. Essentially used as cutting tools for sheets up to 4 mm thick, trimming dies, blanking dies for paper and plastics, shear cutting edges, and rotational shear edges for sheet thicknesses up to 2 mm. D3 steel is a high carbon 2% and high chromium 12% tool steel with excellent wear resistance. Its supply condition is generally annealed for easy machining, with a suggested hardness of 57-58 HRC once dies and tools are made. Stock Availability of Tool Steel - High Carbon Steel HCHCR D3: This Tool Steel materials are normally available in the various forms of HCHCR D3 Round, HCHCR D3 Square and HCHCR D3 Flat. Bigger size flats are normally available in the forged form. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D3: Tool Steel - High Carbon Steel HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Polish is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Polish is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Polish: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Polish: Mild Steel Ms Polish are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Rough is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Rough is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Rough: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Rough: Mild Steel Ms Rough are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

HDS H11 Tool Steel is an all-purpose hot work tool steel with high stiffness and endurance. Good thermal conductivity, resistance to heat cracking, and water cooling to a limited extent. Ejector pins, equipment holders, and shrink-fit chucks are examples of applications. Hot work tool steel containing 5% chromium has excellent strength and toughness, is the best thermal physical phenomenon, and is prone to hot cracking. This ensures lengthy tool life in die-casting, press forging, extrusion, and other processes. Stock Availability of Tool Steel HDS H11: Tool Steel HDS H11 materials are normally available in the various forms of HDS Round, HDS Square and HDS Flat. Commercially available HDS materials are H11 Grade only. HDS H13 Grades are supplied against specific orders. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel HDS H11: Besides applications typical for the area of hot-work steels, this grade is especially used for ejector pins, tool holders, bridge kind tools, liner holders, forging dies, hot work punches, and shrink work chucks.

Gunmetal, also known as red brass, is a type of bronze that consists of copper, tin, and zinc. The proportions may vary, but an approximation is 88% copper, 8-10% tin, and 2-4% zinc. Originally used primarily for making guns, gunmetal has largely been replaced by steel. At Gunmetal Cast, we offer high-quality gunmetal products with excellent machinability and wear resistance. Our products are specifically designed to have high resistance to seizure and good corrosion resistance under normal lubrication conditions. They are commonly used in steam and hydraulic castings, valves, gears, statues, and various small objects like buttons. As the main supplier of gunmetal for leading industry pioneers, we provide the best steel materials at competitive prices. Contact us today to purchase top-notch gunmetal products. Stock Availability of Gun Metal: Gunmetal material is available in the forms of Gunmetal Finishing Bush, Gunmetal Round, Gunmetal Square, Gunmetal Round Bush, Gunmetal Square Bush, Gunmetal Flat, Gunmetal Hexagon. We supply these materials as per customer’s cutting requirement. Applications of Gun Metal: Gunmetal is used for gears and bearings, Pressure tight requirements, valve and pump bodies, Pump impeller, fittings for gasoline and oil lines, Bushing, General engineering application.

Alloy Steel EN353 is a very high strength steel alloy that is hardened and tempered before delivery and contains nickel, chromium, and molybdenum, giving it excellent tensile steel strength, ductility, and wear resistance. With relatively good impact characteristics at low temperatures. This metal is also ideal for a range of high-temperature applications. Round bars have a high internal strength and a high external strength, making them highly wear resistant. Alloy Steel EN353 round bars have a good combination of ductility, strength, and wear resistance. Grade 353 is an extremely high strength alloy steel. We are the primary Alloy Steel EN353 dealers for industry leaders. Contact us to purchase the best steel materials at the cheapest price. Stock Availability of Alloy Steel EN353: This Alloy Steel is normally available in EN353 Round form. Larger Size EN353 rods are available only in forged form. We supply this Alloy steel En353 rods as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN353: Alloy steel En353 is most commonly used in many automobile applications such as heavy duty gear, shaft, pinion, camshaft, gudgeon pins and Machining components.