Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium. One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties. Stock Availability of Tool Steel - High Carbon Steel HCHCR D2: This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement. Applications of Tool Steel - High Carbon Steel HCHCR D2: Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.

Mild Steel MS Structurals is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel MS Structurals is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel MS Structurals: Mild Steel MS Structurals – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel MS Structurals: Mild Steel MS Structurals are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

P20, a type of Pre Hardened Plastic mold steel, possesses a uniform hardness throughout large cross sections. It offers advantageous characteristics such as high weldability with minimal increase in hardness, effective mirror polishability, and reduced streak texture, which facilitate easier finishing. The hardness of P20, a pre-hardened plastic mold steel, ranges from 240-280 BHN. This steel exhibits uniform hardness throughout large cross sections and offers advantages such as good weldability, minimal increase in hardness during welding, the ability to achieve a smooth mirror-like polish, and reduced streak texture for easier finishing. The supplied hardness of this steel is within the range of 240-280 BHN. Stock Availability of Plastic Mould Steel: P20 grade steel materials are normally available in the forms of Round and Flat. We supply these materials as per our Customer’s cutting requirement. Applications of Plastic Mould Steel: Plastic mould steel equivalent to DIN 2311 used for die holders, zinc die, casting dies, backers, bolsters, injection moulds, mould frames of plastic moulds, Shoe Blocks, pressure casting moulds, recipient sleeves etc.

Mild Steel Ms Polish is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Polish is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Polish: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Polish: Mild Steel Ms Polish are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

Mild Steel Ms Rough is the most commonly used steel in Industries. Mechanical properties of MS materials are good tensile strength with ductility, bend ability and better fatigue strength. Mild steel contain less carbon than other steels and are easier to cold-form, making them easier to handle. Mild Steel Ms Rough is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron. Stock Availability of Mild Steel Ms Rough: Mild Steel – MS materials are normally available in various forms such as MS Rough Rod, MS Polish Round, MS Rough Square, MS Polish Square, MS Rough Flat, MS Polish Flat, MS Polish Hexagon, MS Plate, MS Circle, MS HR Sheet, MS CR Sheet, MS Channel, MS Angle, MS Joist, MS Round Pipe, MS Square Pipe. We supply these materials as per our Customer’s cutting Requirement. Applications of Mild Steel Ms Rough: Mild Steel Ms Rough are basic materials used in various applications which require normal strength and durability. Sheet metal made of mild steel is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture) and many other applications.

EN24 Alloy Steel is a high-strength steel alloy. This Alloy Steel EN24 grade contains nickel, chromium, and molybdenum and has a high tensile strength, good ductility, and wear resistance. With reasonably good impact qualities at low temperatures, this material is also suited for a wide range of high-temperature applications. The grade is a nickel-chromium-molybdenum alloy, which provides high tensile steel strength as well as good ductility and wear resistance. It is useful for a wide range of elevated temperature applications due to its comparatively good impact qualities at low temperatures. We are the primary Alloy Steel EN24 dealers for industry leaders. Contact us if you want to acquire the best steel materials at the greatest price. Stock Availability of Alloy Steel EN24: This Alloy Steel Material is available in EN24 Rounds. More than 150mm dia rods can be availed in forged forms also. En24 round rods are supplied as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN24: Alloy Steel EN24 most commonly used as High Strength Shafts used in Aircrafts, heavy vehicle crank shafts, Connecting rods, Gear shafts, Chain parts, Clutches, Propeller shafts, Cam shafts, Spindles, Screws, Studs, Pinions, Taps, Boring bars etc. It is also seen as Punch, Die, Drill bush, Retaining rings and Gears. Preferred to be applied for heat treated components having large sections.

Alloy Steel EN31 is an extremely strong steel alloy that is hardened and tempered before being supplied. Its nickel, chromium, and molybdenum content results in a high tensile steel with good ductility and wear resistance. EN31 round bars have a high internal strength and a high exterior strength, making them extremely wear-resistant. Alloy Steel EN31 is ideal for a wide range of elevated temperature applications due to its comparatively good impact qualities at low temperatures. Alloy Steel EN31 round bars provide an excellent balance of ductility, strength, and wear resistance. EN31 Alloy Steel is a high-strength alloy engineering steel. Stock Availability of Alloy Steel EN31: This Alloy Steel Material is available in EN31 Rounds,EN31 Flats,En31 Square. These materials are supplied as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN31: Applications for EN31 steel include taps, gauges, swaging dies, ejector pins, ball, and roller bearings. It is good quality steel for wear-resisting machine parts and for press tools that do not merit a more complex quality.

Alloy Steel EN353 is a very high strength steel alloy that is hardened and tempered before delivery and contains nickel, chromium, and molybdenum, giving it excellent tensile steel strength, ductility, and wear resistance. With relatively good impact characteristics at low temperatures. This metal is also ideal for a range of high-temperature applications. Round bars have a high internal strength and a high external strength, making them highly wear resistant. Alloy Steel EN353 round bars have a good combination of ductility, strength, and wear resistance. Grade 353 is an extremely high strength alloy steel. We are the primary Alloy Steel EN353 dealers for industry leaders. Contact us to purchase the best steel materials at the cheapest price. Stock Availability of Alloy Steel EN353: This Alloy Steel is normally available in EN353 Round form. Larger Size EN353 rods are available only in forged form. We supply this Alloy steel En353 rods as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN353: Alloy steel En353 is most commonly used in many automobile applications such as heavy duty gear, shaft, pinion, camshaft, gudgeon pins and Machining components.

Alloy Steel EN41B is a nitriding steel made of chromium, aluminum, and molybdenum. This case-hardening steel has strong wear resistance, as well as toughness and ductility. This alloy steel can achieve case hardnesses of up to 68 Hrc. It is also known as nitrating steel. It is toughened to a specific depth depending on the application in nitrating treatment to improve wear resistance and impact load on material. Stock Availability of Alloy Steel EN41B: Alloy Steel EN41B materials are available only in Round form. EN41B Rods are available in annealed condition and it can be machined. We supply this EN41B Steel Rods as per our Customer’s Cutting Requirement. Applications of Alloy Steel EN41B: Alloy Steel EN41B is a very popular grade of low carbon-manganese free-cutting steel, which is most suitable for the manufacture of repetition turned components such as nuts, bolts, hydraulic fittings and studs. This Alloy Steel is used particularly where intricate drilling and machining operations are involved.